Best Ramp for Electric Bikes

Product highlights #1 from Young Electric

• 200 LB TOTAL CAPACITY: Easily transports up to 100 pounds per bike. Universal tire holders and wheel straps are compatible with e-bikes, mountain bikes, road bikes with up to 5” fat tires.
• SAFE AND SECURE ON OFFROAD: Comes with 2-arm fix, Anti-falloff 360° swirl structure and anti-wobble structure, that secure your E-bikes in place without swaying and knocking against vehicle.
• ADJUSTABLE TIRE RACK AND SIMPLE ADATATION: Sturdy 5” wide steel tray fits most narrow and fat tires. Movable cradles for adapting to different types of bikes of lengths. Perfect fit most standard e-bikes, road bikes, mountain bikes and more, even kids’ bike.
• USERS FRIENDLY: Fold Up With One Hand. Easily folds up out of the way when not in use, Ideal for storage or when parking in a garage. Please note: If a part seems missing from the accessory pack, it may have been pre-installed on the product for your convenience. Please check before contacting support.
• 2 INCH HITCH RECEIVER: Designed exclusively for vehicles with a 2" receiver, this rack is built to be sturdy and resist wobbling. For your convenience, it arrives mostly pre-assembled for easy installation. The locking mechanism is a sturdy M16 anti-wobble bolt. (For locked security, a hitch lock is available for separate purchase.) The package also includes all necessary hardware and an instruction manual.

Product highlights #2 from Andjoor

• 👍TIRED OF NARROW, FLIMSY, UNSTABLE, SMALL RAMPS FOR SCOOTERS ? Ues this solid durable stylish big scooter ramps, Its width reaches an astonishing 23.62 inch and weight capacity of 3 adults
• 😎SAFE & FUN: Skate Ramps has slip-resistant finish, non-slip rubber feet, appropriate height for bike jump and bmx
• 🎁GREAT GIFTS: RC car ramps for jumping and companion for ones who love RC ramps for jumping, and the hit of the ones you love! Like they are flying with tons of fun with the skateboarding ramp
• 📦PORTABLE& EASY TO STORE: Not only for scooter ramps and jumps but also easy to carry on the shoulders, assembles in 1 minute, no tools required, easy to take apart to store, load into the car
• ❤️100% Satisfaction & Protection: We guarantee your satisfaction. If you are unhappy with your order, we ensure a replacement or refund through Amazon. We are committed to holding the highest quality standards for you and your loved ones. For maximum enjoyment and safety with Kicker Ramp, please wear helmet preferably a full-face helmet, at least knee pads, elbow pads, and gloves when using bike ramps for jumping

Product highlights #3 from Rockland

• WELCOME TO THE ROKRACK FAMILY!: This product is [RokRack S One], which includes a 1-Ebike Rack (100 LBS Loading Capacity), and a Loading Ramp (100 LBS Loading Capacity).
• HIGH CAPACITY FOR EASY LOADING: Made from high-strength alloy steel and aluminum, this Rockland ebike rack is durable and powerful enough to carry 1 ebike / fat tire / mountain bike / ordinary bike weighing up to 100 LBS. It fits any vehicle equipped with a 2-inch receiver and supports ebikes up to 5" wide and with a wheelbase up to 50", accommodating nearly all kinds of the ebike models on the market.
• LOADING RAMP INCLUDED: No need practicing weightlifting any more! Most of the ebikes are quite heavy, to be honest. It is not an easy thing to lift it onto the rack by oneself. The ramp and rack can be securely hooked together through a slot and buckle system. You can push the ebike onto it effortlessly.
• NO-SCRATCH DESIGN: The rack is elaborately designed to prevent direct contact between the rack's metal surface and your e-bike, avoiding any potential scratch or damage. With ratcheting safety straps, soft padding and rubber covers, your e-bike will be safely tightened onto the rack, facing the slightest wobbles even on the roughest roads.
• ANTI-RUST FINISH: All Rockland bike racks undergo anti-corrosion testing before leaving the factory. With a high-quality anti-rust coating, you can trust that weather won't be an issue at all.
• RV APPROVED: Planning a trip with your ebike but unsure how to fit it in your RV? Don't worry! Rockland ebike racks are specially designed for RVs. By simply attaching the rack to the back, you can transport your bike safely without taking up any interior space. Now enjoy your travels and be ready for the journey!
• PLZ MAKE SURE THE BUCKLE RIGHT!!!: If the clip is facing the wrong direction, the strap won't tighten properly. Simply rotate the clip, and it should function correctly.
• 1 YEAR WARRANTY: Enhance Performance. Easy Installation. High Reliability, and Friendly Customer Service.
• PRE-INSTALLED NOTICE: For your convenience, some components (#7 #10 #11 #12) are pre-assembled on the crossbars or posts, and therefore will not be found separately in the box. All remaining accessories are packed in the box. If you have any questions, please feel free to contact us. Our customer service team will be glad to assist you.

Product highlights #4 from Young Electric

• DURABLE & SAFE: Young Electric bike rack is constructed with reinforced steel and aluminum which makes it durable and powerful enough to carry 1 bikes weighing 100 lbs. Comes with 1-arm fix, patent secure wheel cradles and anti-wobble structure, that secure your E-bikes in place without swaying and knocking against vehicle.
• 100 LB TOTAL CAPACITY: Built for durability and strength, this bike rack boasts an impressive 100lbs capacity, securely accommodating heavier electric bikes or multiple conventional bicycles with ease. Trust in its robust construction for reliable, strain-free transportation.
• RV APPROVED: Specially designed for RV compatibility, this bike rack is RV Approved, ensuring hassle-free installation and safe, stable transport of your bicycles while on the road. Travel with confidence knowing it's tailored for motorhome adventures.
• EASY TO USE: Effortlessly load and secure bikes with our user-friendly bike rack. Its intuitive design allows for quick attachment and detachment. The ramp can be easily mounted and neatly stowed in the frame when not in use. Please note: If a part seems missing from the accessory pack, it may have been pre-installed on the product for your convenience. Please check before contacting support.
• 2 INCH HITCH RECEIVER: Designed exclusively for vehicles with a 2" receiver, this rack is built to be sturdy and resist wobbling. For your convenience, it arrives mostly pre-assembled for easy installation. The locking mechanism is a sturdy M16 anti-wobble bolt. (For locked security, a hitch lock is available for separate purchase.) The package also includes all necessary hardware and an instruction manual.

Product highlights #5 from Young Electric

• Loading Ramp

Product highlights #6 from STUDTREX

• Upgraded Features in TrailV2 Plus: The ramp has been extended to 46”—8” longer than before—making it easier to load bikes onto vehicles with higher hitch receivers. A new Guide Kit is also included, featuring two repositionable support blocks and two screw-mounted slopes fixed in place before the front wheel trays. These additions help guide wider tires and support heavier eBikes, making loading safer, more efficient, and easier—especially for seniors and women
• High Compatibility for Bikes & Vehicles: This hitch-mounted bike rack supports up to 2 bicycles, with a total load capacity of 170 lbs (85 lbs per bike). It is compatible with standard bikes, electric bikes, mountain bikes, and fat tire bikes up to 5” wide and with a wheelbase of up to 50”. Designed for 2-inch hitch receivers, it fits most cars, SUVs, trucks, RVs, minivans, and crossovers—making it an ideal bike rack for cars and a wide range of vehicle types
• Heavy-Duty Stability & Anti-Theft Protection: Built for durability and peace of mind, the TrailV2 Plus hitch bike rack features a keyed hitch lock and two integrated wheel locks to protect your bikes from theft. Rubber-covered straps and padded clamps help prevent scratches on the wheels and tires, while the wrap-around front cradle and hitch tightener provide added stability during transport. Count on this heavy-duty eBike rack for safe and secure bike hauling on every journey
• Secure Mounting & Tilt/Fold Design: The front wheel is firmly wrapped by the cradle, while the rear wheel is strapped securely in a tray under the axle. The wheel clamp presses down tightly on the tire near the front fork and is secured with both a knob and a lock for double protection. This classic three-point system keeps your bike stable in transit. With tilt for trunk access and a foldable frame for storage, this hitch bike carrier offers everyday convenience
• Easy Setup & Reliable Support: The TrailV2 Plus eBike rack comes with all required tools and detailed instructions. For best results, a rubber mallet may be needed to secure the rear wheel holders into the tubes, and an adjustable wrench to tighten some parts. Step-by-step videos are available on the product page. Supported by responsive customer service and peace-of-mind product support, STUDTREX is here to assist you when you need help

Product highlights #7 from BTXKQTH

• 150-pound Strong Load-bearing Capacity: Our Mopeds Ramps are made of high-density carbon steel and reinforced self-locking folding hubs, which can support 150 pounds and can support mountain bikes, road bikes, mopeds and electric bikes. Designed with two styles of hooks to be compatible with more bike ramps.
• Double Hitch Widely Compatible: BTXKQTH E-Bike Ramp equipped with two hitch styles is perfectly compatible with Young Electric/Cravot Cyber/Rockl Rack/Kuat etc. It is not only suitable for all kinds of bicycles, but also can easily cope with the loading and unloading needs of light motorcycles and heavy electric bicycles, and can handle a variety of vehicles on one slope.
• Rust-proof and Durable: BTXKQTH loading ramp adopts electrostatic spraying + high-temperature curing technology to provide excellent rust-proof and weather-resistant performance. The heightened side guardrail design guides the wheel trajectory to avoid accidental side sliding and falling, ensuring that the loading and unloading process of you and your car is smooth and safe.
• Tool-free Installation: This ramp comes with a precise hook that can be easily embedded in the groove of the bicycle rack, and it is stable with one click! No tools are required, and the installation is completed in an instant. The foldable design greatly reduces the size and weight, and it is easily stored in the trunk or cabin.
• A Good Helper for Cycling Adventures: Completely solve the problem of loading heavy vehicles! Easily push the bicycle onto the rack, and one person can complete it quickly, saving physical strength and time. Whether it is a weekend mountain adventure, a long-distance road trip, or daily motorcycle commuting, it is your effective partner for efficient travel.
• Worry-Free Warranty: Enjoy up to 2 years of worry-free warranty to ensure the long-term and efficient operation of the product, eliminating your worries. Please check your bike rack model before purchasing to ensure a perfect fit.

Product highlights #8 from Yes4All

• BEGINNER-FRIENDLY DIMENSION: Measuring 44"L x 18"W x 6.25"H, this skateboard ramp offers ample space for smooth transitions & secure landings, while its height makes it ideal for beginners to learn the basics like jumping, kickturning, tail stalling.
• DURABLE & NON-SLIP TEXTURED SURFACE: The bike ramp made of PP plastic with load-bearing capability up to 220 LB; Additionally, the textured surface helps with friction on the launch ramp & 8 TPE footings prevent from sliding during use
• SOLID SINGLE-PIECE DESIGN: Skate ramp is designed as a one-connected block with no gap; The skateboarding equipment is built to be durable, decreasing the chances of breaking or failing when performing stunts on ramp for skateboards
• PORTABLE DESIGN: Easy to set up & carry to the park, skateboard training field, playgrounds & such, the jump ramp is a space-saving equipment; Made of sturdy but lightweight material, simply store the bike ramp anywhere for effortless organization
• RAMP FOR SOUVENIR: This versatile skateboard ramp is suitable for age 7 - 16, supporting various activities including RC ramps, bike jump and skateboard rails; Encourage outdoor sports, promote physical fitness for those skateboarding enthusiasts

Product highlights #9 from Young Electric

• DURABLE and SAFE: Young Electric bike rack is constructed with reinforced steel and aluminum which makes it durable and powerful enough to carry 2 bikes weighing 100 lbs each. Comes with 2-arm fix, patent secure wheel cradles and anti-wobble structure, that secure your E-bikes in place without swaying and knocking against vehicle.
• 200 LB TOTAL CAPACITY: Built for durability and strength, this bike rack boasts an impressive 200lbs capacity, securely accommodating heavier electric bikes or multiple conventional bicycles with ease. Trust in its robust construction for reliable, strain-free transportation.
• RV Approved: Specially designed for RV compatibility, this bike rack is RV Approved, ensuring hassle-free installation and safe, stable transport of your bicycles while on the road. Travel with confidence knowing it's tailored for motorhome adventures.
• Easy to use: Effortlessly load and secure bikes with our user-friendly bike rack. Its intuitive design allows for quick attachment and detachment. Also equipped with a ramp so that bikes can be easily rolled onto the rack. The ramp can be easily mounted and neatly stowed in the frame when not in use. Please note: If a part seems missing from the accessory pack, it may have been pre-installed on the product for your convenience. Please check before contacting support.
• 2 INCH HITCH RECEIVER: ONLY fits vehicles with 2" receivers, the rack is sturdy and does not wobble easily. Most parts come pre-assembled for easy installation. Parts including locking hitch pins, instruction manual and hardware.

Product highlights #10 from Young Electric

• 200LBS CAPACITY & V-GROOVE RAMP: The latest electric bike rack features an upgrade V-groove ramp for easy loading 2 electric bikes or bikes of up to 200lbs in total (100lbs per bike). Fits tires up to 5" wide and wheelbases up to 50". Compatible with any vehicle with a 2-inch receiver, no extra bar needed for step-thru heavy duty electric bikes or bikes.
• PATENTED ANTI-WOBBLE & ENHANCED GRIP: Our 2-inch tow-mounted electric bike rack has a patented V-shape cradle and bolt system for secure transport. Shock-absorbing hitch threads ensure stability, while upgraded semi-enclosed connection blocks on support bars provide a stronger grip on e-bikes.
• SCRATCH-RESISTANT & EASY INSTALLATION: Instead of the metal hook, our electric bike rack uses a ratchet strap system at three points per bike for stability, with soft padding and rubber covers to prevent scratches. Easy installation with the manual or E-manual.
• FOLDABLE & ANTI-RUST: Made of lightweight aluminum and steel, our foldable bike rack is easy to store and transport. A 1000-hour salt spray resistance coating prevents rust, making it weatherproof. The ramp can be easily installed and stored on the electric bike rack.
• Manufacturer Direct: Our bike rack features 2 bars per electric bike or bike for added support and stability. Enjoy a 1-year warranty and easy setup with detailed instructions and 24/7 support.
• 2 INCH HITCH RECEIVER: Designed exclusively for vehicles with a 2" receiver, this rack is built to be sturdy and resist wobbling. For your convenience, it arrives mostly pre-assembled for easy installation. The locking mechanism is a sturdy M16 anti-wobble bolt. (For locked security, a hitch lock is available for separate purchase.)